How to Oil Your Bat. Apply 2-3 teaspoons of oil to the face of the bat. You can use an old piece of rag but it doesn’t matter if you use your fingers. Make sure you don’t oil the splice, or within a CM of the splice. The oil should cover the face of the bat, the edges, the heel, and about 4 CM from the edges on the back of the bat.
How to oil your cricket bat. If you want to know how to oil your cricket bat, here’s how you do it: The blade of your cricket bat is made of natural wood, and that means that it is best for it to have two light coats instead of one thick coat. Apply the linseed oil coating using a soft rag so as to make sure that it does not reach the handle.
See more videos for Cricket Bat Linseed Oil Applying
Apply about 2-3 drops of the raw linseed oil over the face of the bat. With the help of an old rag, or your finger would suffice just as well, whichever you prefer, spread the oil all over the face of the bat, along its edges, its heel, and the edges of the bat as well.
Method 1: Applying Linseed Oil. Linseed oil softens the bat fibers and then knits them together. This makes them supple and able to withstand being hit by the force of the cricket ball at high speed. 1 – Use raw linseed oil or specialized cricket bat oil to treat your bat prior to use is recommended.
Coat the face of the bat with the oil. You can use a rag or your fingers. Do not put any oil within 25mm of the splice (where the handle joins the blade of the bat). Cover the edges and heel of the bat and about 40 mm in from the edges on the back of the bat. You want the oil on the face of the bat drawn into the face.
Normally you just need about 1 or 2 caps full ( 1-2 teaspoons ) of the Raw Linseed Oil. 3: How to Apply Linseed Oil to a Cricket Bat? Make sure you have removed any type of protective scuff sheets from the cricket bat and cleaned the surface of any leftover goo, debris or dirt. You may need to use sandpaper to clean it off.
Pour a very small amount of oil on to the face of the bat. I like to use Linseed oil as this aids water repellence and is the most commonly used oil for this process. Use the cloth to spread this oil across the entire surface area. Ensure that all uncovered areas of the bat receive a thin layer of oil.
Your cricket bat should be treated with raw linseed oil. Raw linseed oil stays moist for longer than boiled linseed oil. This has dual benefits for your cricket bat. The first benefit is that it keeps the fibers of the bat beautifully bound together throughout the life of the bat. The second benefit is that it increases the elasticity of the fibers which ultimately leads to the best performance and ping from the bat.